Microsoft Security Bulletin MS06-013

Microsoft has tested the following workarounds. While these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

You can help protect against this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of Workaround: There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to Internet Explorer's Trusted sites zone”.

Add sites that you trust to Internet Explorer's Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to Internet Explorer's Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of Workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to Internet Explorer's Trusted sites zone”

Add sites that you trust to Internet Explorer's Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to Internet Explorer's Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
When Internet Explorer displays a Web page that contains certain unexpected method calls to HTML objects, system memory may be corrupted in such a way that an attacker could execute arbitrary code.

Specifically, the public postings discuss a potential behavior in Internet Explorer in the way that HTML objects may handle an unexpected createTextRange() method call to an HTML object. A Web page that is specially crafted to exploit this vulnerability will cause Internet Explorer to fail. As a result of this, system memory may be corrupted in such a way that an attacker could execute arbitrary code.

What is the createTextRange() method?
The createTextRange() method is a dynamic HTML (DHTML) method that is exposed by the DHTML Object Model. For more information about DHTML methods, visit the MSDN Library Web site.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
An attacker could host a malicious Web site that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain malicious content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

Could this vulnerability be exploited through e-mail?
This vulnerability could not be exploited automatically through e-mail or while viewing e-mail messages in the preview pane while using Outlook or Outlook Express. Customers would have to click on a link that would take them to a malicious Web site, or open an attachment that could exploit the vulnerability.

What systems are primarily at risk from the vulnerability?
This vulnerability requires a user to be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

Are Windows 98, Windows 98 Second Edition or Windows Millennium Edition critically affected by this vulnerability?
Yes. Windows 98, Windows 98 Second Edition, and Windows Millennium Edition are critically affected by this vulnerability. The security updates are available from the Windows Update Web site. For more information about severity ratings, visit the following Web site.

What does the update do?
The update removes the vulnerability by changing the way that Internet Explorer initializes memory before using it.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2006-1359.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
Yes. When the security bulletin was released, Microsoft had received information that this vulnerability was being exploited.

Does applying this security update help protect customers from the code that has been published publicly that attempts to exploit this vulnerability?
Yes. This security update addresses the vulnerability that is currently being exploited. The vulnerability that has been addressed has been assigned the Common Vulnerability and Exposure number CVE-2006-1359.

No workarounds have been identified for this vulnerability.

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
When Internet Explorer handles multiple event handlers in an HTML element, system memory may be corrupted in such a way that an attacker could execute arbitrary code.

For example, when Internet Explorer displays a Web page that contains multiple onLoad events in an HTML element, system memory may be corrupted in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
An attacker could host a malicious Web site that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain malicious content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and reading HTML e-mail messages or that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where HTML e-mail messages are read or where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

Note The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting from being used when reading HTML e-mail messages. However, if a user clicks a link in an e-mail message, they could still be vulnerable to this issue through the Web-based attack scenario. It may be possible to exploit this vulnerability without making use of Active Scripting. However, our investigation has shown that this is harder to exploit without the use of Active Scripting.

Are Windows 98, Windows 98 Second Edition or Windows Millennium Edition critically affected by this vulnerability?
Yes. Windows 98, Windows 98 Second Edition, and Windows Millennium Edition are critically affected by this vulnerability. The security updates are available from the Windows Update Web site. For more information about severity ratings, visit the following Web site.

What does the update do?
The update removes the vulnerability by modifying the way that Internet Explorer handles multiple event handlers so that Internet Explorer does not exit in an exploitable way.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2006-1245.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had seen examples of proof of concept code published publicly but had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

Does applying this security update help protect customers from the code that has been published publicly that attempts to exploit this vulnerability?
Yes. This security update addresses the vulnerability that potentially could be exploited by using the published proof of concept code. The vulnerability that has been addressed has been assigned the Common Vulnerability and Exposure number CVE-2006-1245.

Microsoft has tested the following workarounds. While these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

To un-register the Mshta.exe file, use the following command:

Click Start, click Run, type ""%windir%\system32\mshta.exe /unregister" (without the quotation marks), and then click OK.

Impact of Workaround: Users will be prompted to select a software to open HTML Applications (.HTA files) with.

To undo this change, re-register Mshta.exe by following the above steps. Replace the text in Step 1 with ""%windir%\system32\mshta.exe /register" (without the quotation marks).

You can help protect against this vulnerability by modifying the Access Control List on the Mshta.exe file. To do this, follow these steps:

Impact of Workaround: HTML Applications (.HTA files) will stop working.

You can help protect against this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of Workaround: There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to Internet Explorer's Trusted sites zone”.

Add sites that you trust to Internet Explorer's Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to Internet Explorer's Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of Workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to Internet Explorer's Trusted sites zone”

Add sites that you trust to Internet Explorer's Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to Internet Explorer's Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
An HTML Application (HTA) can be initiated in a way that bypasses the security control within Internet Explorer. This allows an HTA to execute without Internet Explorer displaying the normal security dialog box.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
An attacker could host a malicious Web site that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain malicious content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires a user to be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

Are Windows 98, Windows 98 Second Edition or Windows Millennium Edition critically affected by this vulnerability?
Yes. Windows 98, Windows 98 Second Edition, and Windows Millennium Edition are critically affected by this vulnerability. The security updates are available from the Windows Update Web site. For more information about severity ratings, visit the following Web site.

What does the update do?
The update removes the vulnerability by changing Internet Explorer so that the appropriate security dialog is displayed.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

No workarounds have been identified for this vulnerability.

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
When Internet Explorer handles specially crafted and not valid HTML it may corrupt system memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
An attacker could host a malicious Web site that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain malicious content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and reading HTML e-mail messages or that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where HTML e-mail messages are read or where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

What does the update do?
The update removes the vulnerability by modifying the way that Internet Explorer handles the reported specially crafted and not valid HTML.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Microsoft has tested the following workarounds. While these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

You can help protect against this vulnerability by changing your Internet Explorer settings to prompt before running ActiveX controls. To do this, follow these steps:

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to Internet Explorer's Trusted sites zone”.

Add sites that you trust to Internet Explorer's Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to Internet Explorer's Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to Internet Explorer's Trusted sites zone”.

Add sites that you trust to Internet Explorer's Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to Internet Explorer's Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

Prevent COM objects from running in Internet Explorer

You can disable attempts to instantiate a COM object in Internet Explorer by setting the kill bit for the control in the registry.

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

For detailed steps that you can use to prevent a control from running in Internet Explorer, see Microsoft Knowledge Base Article 240797. Follow these steps in this article to create a Compatibility Flags value in the registry to prevent a COM object from being instantiated in Internet Explorer.

For example, to set the kill bit for a CLSID in the Mdt2gddr.dll, file that is included in this security update, paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension.

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{1F7DD4F2-CAC3-11D0-A35B-00AA00BDCDFD}]
"Compatibility Flags"=dword:00000400

You can apply this .reg file to individual systems by double-clicking it. You can also apply it across domains by using Group Policy. For more information about Group Policy, visit the following Microsoft Web sites:

Group Policy collection

What is Group Policy Object Editor?

Core Group Policy tools and settings

Note You must restart Internet Explorer for your changes to take effect.

Impact of Workaround: There is no impact as long as the COM object is not intended to be used in Internet Explorer.

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
When Internet Explorer tries to instantiate certain COM objects as ActiveX Controls, the COM objects may corrupt the system state in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
An attacker could host a malicious Web site that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain malicious content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

Note Customers who have installed the security update included with Microsoft Security Bulletin MS05-052 or a later security bulletin for Internet Explorer are not at risk from attacks originating from the Internet zone.

Are Windows 98, Windows 98 Second Edition or Windows Millennium Edition critically affected by this vulnerability?
Yes. Windows 98, Windows 98 Second Edition, and Windows Millennium Edition are critically affected by this vulnerability. The security updates are available from the Windows Update Web site. For more information about severity ratings, visit the following Web site.

What does the update do?
Because not all COM objects are designed to be accessed through Internet Explorer, this update sets the kill bit for a list of Class Identifiers (CLSIDs) for COM objects that have been found to exhibit similar behavior to the COM object Instantiation Memory Corruption Vulnerability that is addressed in Microsoft Security Bulletin MS05-054. To help protect customers, this update prevents these CLSIDs from being instantiated in Internet Explorer. For more information about kill bits, see Microsoft Knowledge Base Article 240797.

The Class Identifiers and corresponding COM objects are as follows.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

How does this vulnerability relate to one of the vulnerabilities that are corrected by MS05-054?
Both security bulletins address COM object Instantiation Memory Corruption vulnerabilities. However, this update also addresses new CLSIDs that were not addressed as part of MS05-054. MS05-054 helps protect against exploitation of the CLSIDs that are discussed in that bulletin.

Note Customers who have installed the security update included with Microsoft Security Bulletin MS05-052 or a later security bulletin for Internet Explorer are not at risk from attacks originating from the Internet zone.